© Cal-Pak, Incorporated 2017
Made with Xara
Local Cal-Pak Reps
Contact US  Cal-Pak, Incorporated 85 H Flagship Drive North Andover, MA  01845 T:  781-944-8000 F:  978-946-9449 E:  sales@cal-pak.com   Place an Order

  Parts & Consumables

    Need to Place an Order?      Please call us at 781-944-8000 or      email us at sales@cal-pak.com to      place an order for inks, solvents,             ribbons, labels, or parts.
ABC Model 72SA Semi-Automatic Case Palletizer
This simple and efficient Model 72SA case palletizer makes it easy to upgrade your hand palletizing operation, without losing the flexibility of manual palletizing. This case palletizer eliminates the bending and lifting associated with manual palletizing, reducing the risk of back injuries and resulting high insurance premiums. It allows case feed from any direction, providing unlimited flexibility, and the small footprint saves floor space. If your needs change, this semi-automatic case palletizer is designed for an easy upgrade to automatic operation.  Palletizing is as simple as 1-2-3.
Square Layers Palletize into High Quality Pallet Loads A rear layer retainer plate and two side layer squaring plates center each layer on the pallet. The layer is held firmly to retain it squarely during the deposit cycle.  A low friction roller transfer table is available to allow easy handling of heavy and shrinkwrapped cases.
Increase Operator Efficiency No lifting, stooping or walking around the pallet is required to operate this case palletizer. Once a layer is formed, the operator simply presses the start button and the layer is palletized automatically.
Touchscreen control panel provides Set-up for daily, shift or batch runs Simple sequence for auto/manual functions Diagnostic status report screen Input/output machine status On-screen bag counter
Features to Maximize Palletizing Production Stable layer transfer is ensured by the stainless steel, tapered stripper plate. The elevator table is counterweighted and frequency-driven to remove load stress from the drive motor, ensuring smooth transport and longer motor life. It is supported by crossbar reinforcing beams to reduce case friction.
High Performance Features Heavy steel frame construction- 7 gauge, 3/16" steel, welded and bolted for strength Stainless steel, reinforced elevator table with gravity design - Maximum tier weight 650 lbs. Counterweighted elevator table eliminates drive motor stress Stainless steel, tapered stripper plate for smooth load transfer Rear layer retainer plate and side layer squaring plates for square pallets Allen-Bradley PLC operation IEC motor starters Variable frequency motor drives
Application Video: 72SA Semi-Automatic Palletizer
Operation 1. As cases feed by conveyor, the operator slides them into the correct pallet pattern. 2. When the layer is complete, the operator presses the pushbutton, and the layer is automatically placed squarely on the previous pallet layer. 3. The table automatically returns to its original position for the next load.
Optional Palletizer Features Low friction roller transfer table to accommodate heavy or shrink-wrapped cases Upgrade to fully automatic operation Powered pallet discharge conveyor
Designed for Your Needs Today and in the Future While each machine is pre-programmed for case sizes and pallet patterns to accommodate your current requirements, flexibility for future requirements is built in. A complete selection of case infeed and pallet discharge alternatives are available, as well as many case orienting and accumulation options.

Semi-Automatic Low Level Case Palletizer