ABC Model 436T
Top Case Sealer
With a super small footprint (only 10’ long) and A-B-C’s
trademark rugged construction, this sealer will satisfy
your most challenging sealing requirements. Quality
components include a pacer-belt case transfer that
automatically feeds and spaces cases for precision
sealing, a rotary tucker for smooth, high speed flap
folding, and flexible compression rollers for secure tape
sealing. For quality, value, and versatility in a production
case sealer, choose the Model 436T from A-B-C.
Nonstop Case Feed for Reliable High Speed Sealing
Nonstop case feed keeps your line moving at maximum speed- cases
may feed to the sealer back to back or spaced, and the metering belt
automatically spaces each case for synchronized flap folding and
sealing.
PS Tape Seal
Rotary Flap Tucker for Smooth Operation
Simply smooth is the only way to describe this flap tucker. As
cases pass by, it automatically rotates to gently and accurately fold
the trailing inner flap of each case. Contoured flap folders close
the outer case flaps gently at the scoreline even when running
cases with poor scores. A steel tongue rides between the flaps as
they are folded, preventing flap overlap.
Reduced Maintenance Features
•
Rapid-adjust cranks for case change
•
Maintenance-free sealed bearings
•
Self lubricated pneumatic tucker
•
Self-lubricating air cylinders
•
Adjustable leveling footpads
•
Automatic water eliminator
•
Elevated beacon fault light
Specifications
•
Case range: RSC, CSSC cases
•
Electrical: Primary 230 or 440v, 60hz, 3ph, NEMA 12
•
Mechanical: 1 hp motor
•
Air: .08 cu. ft. per cycle at 60 psi
•
Speed: To 50 cases/minute, depending on sealing style
•
Consult A-B-C for details
Tape System Designed for Maximum Uptime
The tape system is externally mounted, making it quick and easy to
replace an empty tape roll and return to production. An optional "roll
empty" sensor stops the sealer as the end of the tape leaves the roll.
The attendant simply replaces the tape, and attaches the new roll to
the tail of the previous one.
High Performance Features
•
Automatic case feed- pacer belt infeed
automatically feeds cases spaced or back to back
•
Automatic minor flap closing
•
Contoured cast aluminum flap folders
•
Top quality hot melt adhesive applicator/ tape
applicator
•
NO-CRUSH flexible compression rollers that
compress case flaps securely to provide square,
well-sealed cases
•
Gull-wing style high visibility doors that stop
production when opened
•
Low voltage control circuit transformer
•
Convenient power on-off button
•
Seal with hot melt or tape interchangeably
Built for Production
This case sealer's stainless steel frame is welded and bolted for strength, and the upper operating mechanisms are
secured to the frame by a solid rack and gear system. Drive shafts are solid 1-1/4" steel. The clear guard doors
combine maximum visibility with total protection as they stop production when opened. All these production features,
built into a compact case sealer, make the Model 436 the solution for reliable top sealing.
