© Cal-Pak, Incorporated 2017
Made with Xara
Local Cal-Pak Reps
Contact US  Cal-Pak, Incorporated 85 H Flagship Drive North Andover, MA  01845 T:  781-944-8000 F:  978-946-9449 E:  sales@cal-pak.com   Place an Order

  Parts & Consumables

    Need to Place an Order?      Please call us at 781-944-8000 or      email us at sales@cal-pak.com to      place an order for inks, solvents,             ribbons, labels, or parts.
ABC Model 340HS Case Erector
Here’s a workhorse case erector built to manage the special requirements of oversized corrugated cases. It’s built tough, with a heavy tubular steel frame, packed with rugged components that handle large KD blanks at top production speeds. Its continuous motion mechanical case drive and “walking beam” case transfer provide positive case positioning and total control. This Model 340 case erector runs a full range of case sizes with quick crank-adjust changeover, and offers standard features that work to increase efficiency and reduce your maintenance tasks.
Easy Load Case Magazine with Positive Indexing The high capacity KD magazine holds up to two case stacks, and automatically indexes each stack into position to provide a continuous case supply with minimum operator attention. Cases are indexed with a combination gripper/sliderail system that is designed to accommodate out- of-spec corrugated and smoothly handles large, heavy cases.
Servo-powered Sealing Ram (Adhesive Sealing) A servo motor powers the sealing compression ram to provide full compression on every case and ensure a secure seal during high speed production. 2” or 3” wide Tape Applicator head (Tape sealing)
A-B-C Intelligent Control Ensures Precise Operation Intelligent Control takes PLC logic one step further, to provide unprecedented control of line performance. Closed loop position feedback ensures precise timing of each operating sequence, utilizing non-contact sensors to provide input. The touch screen display provides real-time operating data, and allows independent operation of all functions, diagnostics, and changeover settings.
Over Size Cases
Reliable, Case-squaring Mechanical Transfer The mechanical walking beam transfer bars are mounted on synchronized transfer chain. This design provides additional squaring action as cases travel from erecting through sealing.
Positive Flap Folding The major case flaps are gripped firmly as the heavy-duty rear flap tucker folds the inner flap, ensuring efficient flap folding and sealing.
Features for Reliable Operation A-B-C’s Intelligent Control electronics provide total control of operation Low level case magazine holds 2 stacks of cases eliminating frequent refills Automatic case feed from top of stack by dual floating grippers to smoothly feed warped or band-marked cases Dual top and bottom vacuum grippers that over-open cases ensuring proper opening of cases with poor manufacturer’s joints Reliable walking beam case transfer
Specifications Case range: RSC and HSC cases Electrical: Primary 230 or 460v, 60hz, 3ph Air: Adhesive: 1.12 scfm per cycle @ 80 psi Air: Tape: .576 scfm per cycle @ 80 psi Speed: Up to 30 cases per minute
High Performance Features Heavy steel box frame construction- welded and bolted for strength All-mechanical main drive High capacity vacuum system Direct drive walking beam case transfer
Application Video: 340 Hot Melt Case Erector
Reduced Maintenance Features Non-contact sensors monitor machine operation Sealed bearings throughout Gull-wing style high visibility machine doors allow easy machine access Touchscreen control for machine jog, diagnostics, troubleshooting, changeover settings Back-up eye for surge control Elevated beacon fault light