ABC Model 335
Tablock Case Erector
Here's a tablock case erector that's the ultimate in
flexibility- it runs RSC Tablock, RSC, HSC and CSSC
cases- with no change parts required. The secret is the
built-in tablock flap folding module. When running
tablock cases, it smoothly compresses tablock case flaps
while protecting the tabs, for perfectly formed tablock
cases. To run other style cases, simply operate the
machine in tablock-bypass mode. A space-saving
compact design and reduced maintenance features
make this Model 335 case erector / bottom sealer the
solution for your tablock case forming requirements.
Large Capacity, Easy-Load Case Magazine
The self-indexing auxiliary case magazine assures a continuous case
supply to the erector. As each stack is used, another moves into position
maximizing time between refills. The ergonomic low level design makes it
easy to refill without lifting cases.
Shock-absorbing Case Sealing and Squaring Ram
The case compression mandrel is equipped with shock absorbers to
eliminate machine stress, to reduce maintenance and ensure long
machine life.
Color Touchscreen Gives You Total Control
The color display shows real-time operating data and allows independent
operation of all functions, diagnostics, and changeover settings. Its simple, step-
by-step sequences simplify set up and operation. Non-contact sensors monitor
machine operation and ensure precise timing of each operating sequence.
Tablock Cases
Case Feed Designed for Smooth Operation
This case erector has self-adjusting, spring loaded grippers that ensure
proper case feed from uneven stacks of warped or band-marked cases.
Their unique "floating" design allows them to operate independently to
grip each case firmly and provide a consistent and reliable case feed.
Simple Tablock Folder with Bypass
This innovative method of tablock opening is the result of over 60
years of packaging machinery development. It's an original design
that folds the flaps smoothly without stress on the tabs that can
cause tearing or release. To run regular cases, the tablock module
is set at bypass mode. It's that simple.
Features for Reliable Operation
•
A-B-C’s Intelligent Control electronics provide total control of operation
•
Low level case magazine holds 3 stacks of cases (approx 300 KDs) eliminating frequent refills
•
Automatic case feed from top of stack by dual floating grippers to smoothly feed warped or band-marked cases
•
Tablock opener is designed to gently fold tablock flaps while reducing stress on tabs, to prevent tearing or
release
•
Dual top and bottom vacuum grippers that over-open cases ensuring proper opening of cases with poor
manufacturer’s joints
•
Reliable walking beam case transfer
•
Electronic solenoid valve package
High Speed, Mechanical Operation and Space-saving, Compact Design
The Model 335 case erector runs a realistic 35 cases per minute on a continuous motion, all-mechanical drive system.
Each case blank is positively fed from the magazine by combination gripper/slide bar case transfer. A cam-operated
opening arm and mechanical walking beam case transfer provide positive case handling and reliable operation
throughout.
At only 19 linear feet including the extended auxiliary magazine and tablock module, this tablock case erector is 30%
smaller than competitive machines.
Specifications
•
Case range: RSC, RSC-Tablock and HSC cases
•
Electrical: Primary 230 or 460v, 60hz, 3ph, NEMA 12
•
Air: Adhesive: 1.621 scfm per cycle @ 80 psi
•
Speed: Up to 35 cases per minute
High Performance Features
•
Heavy steel box frame construction-welded and
bolted for strength
•
All-mechanical main drive
•
High capacity vacuum system
•
Direct drive walking beam case transfer
Reduced Maintenance Features
•
Non-contact sensors monitor machine
operation
•
Sealed bearings throughout
•
Gull-wing style high visibility machine
doors allow easy machine access
•
Touchscreen control for machine jog,
diagnostics, troubleshooting, changeover
settings
•
Back-up eye for surge control
•
Elevated beacon fault light
