ABC Model 30T
Top & Bottom Case Sealer
Here's a tape case sealer that can handle real-world
production demands. It's built tough for high speed,
three-shift-a-day case sealing operation. It seals cases
squarely and securely, with A-B-C's exclusive case-
squaring flight lugs and contoured flap folders. It's
sensibly designed with quality components, built into the
heavy stainless steel frame, to virtually eliminate
downtime for maintenance. For a case sealer built to
fulfill your production needs today and in the future,
choose the Model 30T tape case sealer.
Low Maintenance
The rugged construction of the Model 30 hot melt case sealer is your
guarantee that it will run longer with less wear or care. Yet this
powerhouse case sealer has additional features to minimize your
maintenance tasks. The main drive gear assembly is enclosed in a
lubricating oil bath to eliminate gear wear. Sealed bearings and self-
lubricated air cylinders never need maintenance. The automatic water
eliminator prevents air valve damage caused by water in air lines. When
routine maintenance or cleaning is necessary, the gull-wing doors swing
out of the way to allow complete machine access.
Clean, Functional Design
This case sealer's sleek stainless steel frame won't rust and never
needs painting. The clear, gull-wing doors are a standard feature, not
special order. They are electrically interlocked to stop the sealer when
opened, and allow total access to the machine.
PS Tape Sealer
Features for Square Cases
A-B-C's exclusive flight lugs push each case at the corners, to square it
during transfer. The cast aluminum flap folders are gradually contoured
to fold the flaps at the score line then close them smoothly with no flap
overlap. Even cases with undefined scores are folded squarely and
securely.
No Operator Required
Each case is automatically indexed into the sealer from your
conveyor. As the motor-driven flight lugs transfer the case through
the sealer, the top inner flaps are folded by a powered flap tucker.
Then, the outer flaps are folded and tape is applied. The case exits
the machine sealed, square and ready for palletizing.
Reduced Maintenance Features
•
Rapid-adjust cranks for case change
•
Maintenance-free sealed bearings
•
Self lubricated pneumatic tucker
•
Self-lubricating air cylinders
•
Adjustable leveling footpads
•
Automatic water eliminator
•
Elevated beacon fault light
Specifications
•
Case range: RSC cases
•
Electrical: Primary 230 or 440v, 60hz, 3ph, NEMA 12
•
Mechanical: 1 hp motor
•
Air: .05 cu. ft. per cycle at 60 psi
•
Speed: To 50 cases/minute, depending on sealing style
•
Tape roll diameter: up to 15-1/2” maximum on 3”
diameter core
Built for Production
This case sealer's stainless steel frame is welded and bolted for strength, and the upper operating mechanisms are
secured to the frame by a solid rack and gear system. Drive shafts are solid 1-1/4" steel. The clear guard doors
combine maximum visibility with total protection as they stop production when opened. All these production features,
built into a compact case sealer, make the Model 30 the solution for reliable top & bottom sealing.
Easy Tape Roll Replacement
This sealer offers features that eliminate wasted tape and dramatically
reduce lost production time for tape roll changes. Both the top and
bottom tape rolls are exterior mounted to allow easy access. The "roll
empty" sensor stops the sealer just as the end of the tape comes off the
roll. The attendant simply replaces the roll, and attaches the new roll to
the tail of the last roll.
