ABC Model 30
Top & Bottom Case Sealer
Simple in design, reliable in operation ... that's how
A-B-C builds case sealers. And, over the years, our
commitment to quality has made A-B-C case
sealers the industry standard. Now we're setting
new standards. Today's Model 30 hot melt sealer
is the best ever, with a new design and high
productivity features to handle real-world
production demands today and in the future.
Low Maintenance
The rugged construction of the Model 30 hot melt case sealer is your
guarantee that it will run longer with less wear or care. Yet this
powerhouse case sealer has additional features to minimize your
maintenance tasks. The main drive gear assembly is enclosed in a
lubricating oil bath to eliminate gear wear. Sealed bearings and self-
lubricated air cylinders never need maintenance. The automatic water
eliminator prevents air valve damage caused by water in air lines. When
routine maintenance or cleaning is necessary, the gull-wing doors swing
out of the way to allow complete machine access.
Clean, Functional Design
This case sealer's sleek stainless steel frame won't rust and never
needs painting. The clear, gull-wing doors are a standard feature, not
special order. They are electrically interlocked to stop the sealer when
opened, and allow total access to the machine.
Hot Melt Adhesive
Features for Square Cases
A-B-C's exclusive flight lugs push each case at the corners, to square it
during transfer. The cast aluminum flap folders are gradually contoured
to fold the flaps at the score line then close them smoothly with no flap
overlap. Even cases with undefined scores are folded squarely and
securely.
The compression section is an independent unit, with a dual belt case
transfer that is powered by a 1 hp motor to assure proper case transfer.
The top belt is backed by spring loaded rollers which adjust to varying
case heights for a uniform seal.
Easy Changeover
Case size changeover is simple. First, position a new case at the
infeed and use the manual crank adjusts to fit the new case height
and width. Adjustments may be made from either side of the
sealer. Next, set the new adhesive pattern at the electronic
adhesive timer. In minutes, the case sealer is back in production.
Reduced Maintenance Features
•
Rapid-adjust cranks for case change
•
Maintenance-free sealed bearings
•
Self lubricated pneumatic tucker
•
Self-lubricating air cylinders
•
Adjustable leveling footpads
•
Automatic water eliminator
•
Elevated beacon fault light
Specifications
•
Case range: RSC cases
•
Electrical: Primary 230 or 440v, 60hz, 3ph, NEMA 12
•
Mechanical: 1 hp motor
•
Air: .06 cu. ft. per cycle at 60 psi
•
Speed: To 50 cases/minute, depending on sealing style
•
Standard compression lengths: 4’, 6’, 8’, 10’, 12’, 14’, 16’
High Performance Features
•
Automatic case feed
•
Automatic minor flap closing
•
Heavy-duty flight lug drive
•
Cast aluminum flap folders
•
Top quality hot or cold adhesive applicators
•
Adhesive pattern timer
•
Independent motorized compression unit
•
Spring-loaded top compression rollers
•
Gull-wing style high visibility doors
•
Low voltage control circuit transformer
•
Convenient power on-off button
Built for Production
This case sealer's stainless steel frame is welded and bolted for strength,
and the upper operating mechanisms are secured to the frame by a solid
rack and gear system. Drive shafts are solid 1-1/4" steel. The clear guard
doors combine maximum visibility with total protection as they stop
production when opened. All these production features, built into a compact
case sealer, make the Model 30 the solution for reliable top & bottom
sealing.
