ABC Model
300T Case Erector
A-B-C’s Model 300 box tape erector is an economical,
lower speed model of the industry-leading 330 erector.
Built for speeds from 15 to 25 cases per minute, this
machine will satisfy your midrange requirements and
ensure the versatility you need for everchanging
market needs. It’s the box erector/tape sealer, built
with A-B-C’s dedication to quality construction and
reliable performance, that will deliver big ticket
performance on your packiaing line and a quick
payback on your investment.
Large Capacity, Easy-Load Case Magazine
The self-indexing auxiliary case magazine assures a continuous
case supply to the erector. As each stack is used, another
moves into position maximizing time between refills. The
ergonomic low level design makes it easy to refill without lifting
cases.
Positive Flap Folding and Case Transfer
The major case flaps are gripped firmly as the heavy-duty rear flap
tucker folds the inner flap, ensuring efficient flap folding and sealing. The
continuous motion main drive powers the walking beam case transfer
that squares cases as they travel. The main drive has a sealed bearing
linkage that ensures high speed performance for the long haul.
Color Touchscreen Gives You Total Control
The color display shows real-time operating data and allows independent
operation of all functions, diagnostics, and changeover settings. Its simple,
step-by-step sequences simplify set up and operation. Non-contact sensors
monitor machine operation and ensure precise timing of each operating
sequence.
Tape Seal
Case Feed Designed for Smooth Operation
This case erector has self-adjusting, spring loaded grippers that ensure
proper case feed from uneven stacks of warped or band-marked cases.
Their unique "floating" design allows them to operate independently to
grip each case firmly and provide a consistent and reliable case feed.
Reliable Case Erecting Mechanism
Production-proven since 1990, A-B-C's cam-operated vacuum
pullback case opener design is superior in running less-than-
perfect corrugated. This method utilizes dual vacuum grippers-
lower grippers provide solid compression to hold the case firmly
while the upper grippers pull the case open.
Features for Reliable Operation
•
Low level case magazine holds 3 stacks of cases (approx. 300 KDs) eliminating frequent refills
•
Automatic case feed from top of stack by dual floating grippers to smoothly feed warped or band-marked cases
•
Dual top and bottom vacuum grippers that over-open cases ensuring proper opening of cases with poor
manufacturer’s joints
•
Reliable walking beam case transfer
•
Outer flaps are over-opened to ensure smooth minor flap folding
Cases Sealed Squarely and Securely
After flap folding, cases enter the tape sealing section, and are
transported by dual upper and lower belt drive as the tape is applied.
The upper and lower belts are synchronized to ensure that the cases
remain square during tape sealing.
Quick Changeover
Adjustment for the entire range of case sizes may be completed without change parts, by using rapid adjust cranks
and slides with locking handles.
Specifications
•
Case range: RSC and HSC cases
•
Electrical: Primary 230 or 460v, 60hz, 3ph, NEMA 12
•
Air: 1.265 scfm per cycle at 80 psi
•
Speed: Up to 25 cases/minute
High Performance Features
•
Tubular steel frame construction- welded and
bolted for strength
•
All-mechanical main drive
•
High capacity vacuum system
•
Direct drive walking beam case transfer
•
Substantial 1 hp motor powers erector
•
Adjustable leveling footpads
Reduced Maintenance Features
•
Non-contact sensors monitor machine operation
•
Sealed bearings throughout
•
Sliding interlocked panel guards
•
Back-up eye for surge control
•
Quick changeover with rapid-adjust hand cranks
•
Automatic water eliminator keeps air lines dry
Optional Features
•
Magazine extensions for additional capacity
•
CSSC case capability
•
Grouped lubrication fittings
•
Repeatable position indicators on adjustment shafts
