Need to Place an Order? Please call us at 781-944-8000 or email us at firstname.lastname@example.org to place an order for inks, solvents, ribbons, labels, or parts.
ABC Model 300 Case Erector
A-B-C’s Model 300 box erector is an economical, lower speed model of the industry-leading 330 erector. Built for speeds from 15 to 25 cases per minute, this machine will satisfy your midrange requirements and ensure the versatility you need for everchanging market needs. It’s the box erector/sealer, built with A-B-C’s dedication to quality construction and reliable performance, that will deliver big ticket performance on your packiaing line and a quick payback on your investment.
Large Capacity, Easy-Load Case MagazineThe self-indexing auxiliary case magazine assures a continuous case supply to the erector. As each stack is used, another moves into position maximizing time between refills. The ergonomic low level design makes it easy to refill without lifting cases.
Positive Flap Folding and Case TransferThe major case flaps are gripped firmly as the heavy-duty rear flap tucker folds the inner flap, ensuring efficient flap folding and sealing. The continuous motion main drive powers the walking beam case transfer that squares cases as they travel. The main drive has a sealed bearing linkage that ensures high speed performance for the long haul.
Color Touchscreen Gives You Total ControlThe color display shows real-time operating data and allows independent operation of all functions, diagnostics, and changeover settings. Its simple, step-by-step sequences simplify set up and operation. Non-contact sensors monitor machine operation and ensure precise timing of each operating sequence.
Hot Melt Adhesive
Case Feed Designed for Smooth OperationThis case erector has self-adjusting, spring loaded grippers that ensure proper case feed from uneven stacks of warped or band-marked cases. Their unique "floating" design allows them to operate independently to grip each case firmly and provide a consistent and reliable case feed.
Reliable Case Erecting MechanismProduction-proven since 1990, A-B-C's cam-operated vacuum pullback case opener design is superior in running less-than-perfect corrugated. This method utilizes dual vacuum grippers- lower grippers provide solid compression to hold the case firmly while the upper grippers pull the case open.
Features for Reliable Operation•Low level case magazine holds 3 stacks of cases (approx. 300 kd’s) eliminating frequent refills•Automatic case feed from top of stack by dual floating grippers to smoothly feed warped or band-marked cases•Dual top and bottom vacuum grippers that over-open cases ensuring proper opening of cases with poor manufacturer’s joints•Reliable walking beam case transfer•Outer flaps are over-opened to ensure smooth minor flap folding
Shock Absorbing Case Compression RamThe case compression mandrel is equipped with shock absorbers to eliminate machine stress, to reduce maintenance and ensure long machine life.
Quick ChangeoverAdjustment for the entire range of case sizes may be completed without change parts, by using rapid adjust cranks and slides with locking handles.
Specifications•Electrical: Primary 230 or 460v, 60hz, 3ph, NEMA 12•Air: 0.80 scfm per cycle at 80 psi•Consult A-B-C for case range•Speeds up to 25 cpm
High Performance Features•Tubular steel frame construction•All-mechanical main drive•High Capacity vacuum system•Direct drive walking beam case transfer•Substantial 1 hp drive motor powers erector•Adjustable leveling footpads
Optional Features•Magazine extensions for additional capacity•CSSC case capability•Repeatable position indicators on adjustment shafts•Grouped lubrication fittings
Reduced Maintenance Features•Non-contact sensors monitor machine operation•Sealed bearings throughout•Sliding interlocked panel guards•Touchscreen control on hot melt model to set adhesive pattern•Back-up eye for surge control•Automatic water eliminator keeps air lines dry